How to Open and Reset a 3 Digit Combination Lock

There is no need to worry if you forgot your combination lock code because you can learn how to open it.

3 Digit Combo Master Luggage Lock

Handing over your valuable bags and luggage to any airline security can get you a pit in your stomach. Have you wondered about how to open and reset a 3 digit combination lock? You are lucky because there is a way to secure your luggage with master locks approved by the TSA. It will provide essential security to your baggage and other belongings. 

The Transportation Security Administration used to cut the locks off. The manufacturers only make these three-digit locks for personal use, but do not worry about forgetting the combination. There are some ways to change the mixture if you have forgotten it.

Try The Combination

The first way to open the combination lock is to try that combination that is in your mind and you use the most or get the lockout service in Chicago. Turn the number read side up to the right side to start unlocking the lock. Roll the left-most dial-up until the very first variety of your combination, the scored inbounds marker just to the left of the dial.

Roll the middle dial till the appropriate number lines up with the number to its left. Do the same for the right-most number. Your three-digit mix needs to currently show, left to right, lined up with the scored hash marks.

Pull the body away from the U-shaped metal ring without transforming any one of the dials. The lock will click open up to reveal a hook. The hook rotates 360 levels to make sure that it is in place or removed.

Deal With a Forgotten Mix

If you’ve failed to remember the mix for your lock, try this choice technique for unlocking it:

  • Pull the body and the U-shaped ring far from each other to pressure the system inside the lock.
  • Again pull the body away from its add-on, or, if the combination lock is not affixed, use pressure on the U-shaped ring out from the lock’s body with your fingers. Maintain holding a firm, stable pressure.
  • Roll the dial closest to the U-shaped ring slowly while keeping stable stress on the device. The dial will undoubtedly get tough to roll over three consecutive numbers, and one of those numbers will indeed click. You need to feel and hear this tiny click, which is the initial number to your combination.
  • Repeat the previous step with the center dial and afterward the farthest dial. Leave the dial established when you find the click, moving onto the following dial. The combination will disclose itself, allowing you to draw the U-ring away from the body of the lock.

Master Lock Reset

Resetting your Master Lock, establish your mix, and you can use it appropriately in the future according to the original directions. Right here’s exactly how:


  1. Hold the body of the lock to make sure that the numbers encounter far from you. Set the mix as well as release the U-shaped ring.
  2. Turn the hook counterclockwise 90 degrees up of the U-shaped ring. Keep the notch on a stem of the curve and line up the hole on the lock’s body. Press the stem of the hook down right into the body of the lock regarding it will go.
  3. Now, transform the hook approximately one more 90 degrees counterclockwise while it is depressed right into the body of the lock. After that, roll the dials up until you have your new mix.
  4. It’s time to turn the hook 90 degrees clockwise and increase the stem out of the lock’s body. Transform it another 90 degrees clockwise and also push it back into the secured position. The lock currently uses your new mix. If you are feeling any difficulty, then do not hesitate to the service of lock installation in Chicago


Keep the new password safe by emailing yourself or secure it in your mobile notes. For your remembrance, you can give it a title as luggage lock code or anything that you can find in the time of need.

Do not try this technique on someone’s luggage that does not belong to you because it’s against the law.

How To Reset A Samsonite Lock

When you purchase any combination lock, they are set on combination by factory default. So, you can change it if you want.

  1. Dial that default combination or triple zero because the factory locks have this as default.
  2. Now, find the reset button. You can see it on the side of the lock.
  3. Press and hold the button until you dial your desired combination. Try to set the lock as a sequence that is easy for you but hard for others.
  4. After releasing, the lock is now set on a new combination that you chose.
  5. You should check the unique combination after resetting it that if it is working or not. If it is not working, then repeat these steps to reset the lock.

Also Read: Signs that Show You Need Furnace Blower Motor Replacement

Related Articles

Leave a Reply

Your email address will not be published. Required fields are marked *

Back to top button